RTZ Audio PSL410 Single Rack Power Supply

PSL410 Linear Power Supply

The PSL410 is our new single rack ultimate power solution for the UX410 ten module rack system. The PSL410 supply provides up to 1.5A of continous duty power without suffering the heat concerns and startup over current problems that can plauge cheap switching supplies.

Soft Start

The PSL410 contains soft-start circuitry to avoid start-up over current problems when powering many modules with large capacitive and inductive loads. The 16V power rails gradually ramp at power-on and allow the load to charge slowly intially. This feature greatly reduces the in-rush surge at power up and extends component life as well as the life of your modules.

Cool Under Load

The PSL410 is equipped with large efficient heatsinks and a low velocity low noise internal fan. The fan is thermostatically controlled and the speed of the fan increases as the ambient temperature inside the unit rises. The fan will run at lower speeds with less fan noise under light load and/or temperature conditions. Likewise, the fan will run at higher speeds if the unit is under heavy load or placed in a hot environment.

The PSL410 contains a high current toroidial transformer custom designed and wound to our specifications and requirements. The transformer is wound using a low noise winding technique and is specifically designed for use with audio applications. The toroid transformer also contains and internal ground screen between the primary and secondary windings for additional electrostatic noise isolation.

RTZ Audio PSL410 Single Rack Power Supply
Click To Enlarge
  • Item #: RTZ PSL410
  * Marked fields are required.
Price $661.00